Remote Berner BHS140 LS with 4 channels on 868MHz
4-channel remote with rubber buttons for easy use.
This remote is suited for the control of receivers and openers of the brand Berner.
NOTE:
This is the BHS140 868 with a BLUE LED that functions on 868MHz. There is also a RCBE868 that looks identical, but this remote has a RED LED and is not compatible.
Programming your remote
Self-learning (from remote to remote) possibly near the receiver.
Program directly to the receiver. Consult the manual of your controller/opener/receiver.
1. Press down the upper and lower buttons at the same time. The LED will light up.
2. Within 4 seconds, press down the button you want to program.
3. Hold the old remote with its frontside against the new remote at a distance of approx. 50 mm.
4.In this position, press the button on the old remote that has the signal you want to transfer to the new remote. After copying successfully, the LED will blink for 5 seconds. If the LED does not start blinking, release the button on the old remote and try again.
5. Release both buttons. The button on the new remote now possesses the same function as the old remote.