Winchset TeleRadio PNS-MI-WCH with 3 channels on 2.4GHz
This set consists of a pre-wired receiver with accompanying handheld transmitter and is especially suitable for operating winches, swimming pool canopies & covers, (mobile) lifts, tailgates and other equipment.
The transmitter is equipped with 4 push buttons:
- Installation powering on
- Installation powering off
- Up arrow
- Down arrow
This article is also known as:
PNS-R171-T1365 (earlier generation)
PNS-R171-T2165 (latest generation)
NOTE: This receiver has a digital (transistor) output. There is also a set with a relay output!
Product features
The receiver PN-RX-MI4 is part of Tele Radio's Panther program. The product is intended for use in automation installations for winches, lifts, presses, doors and other movable and switchable devices.
Equipped with 4 transistor outputs of which 3 are usable. 1 for switching on the installation and 2 for a direction (up/down or left/right).
Equipped with a memory with a storage capacity of 8 remotes.
Supplied as standard
1x Receiver in plastic housing (PNS-R171)
Pre-mounted cable on the receiver (Approx. 1.5 Mtr)
1x Manual in English language
1x Handheld transmitter with 4 push buttons On/Off/Up/Down (PNS-T2165)
2x battery AA/LR03 Alkaline
Programming handheld transmitters
Can be programmed directly on the receiver. See the manual for your control/drive/receiver.